When you need to wear apparel with your Samsung Gear S3
When you want to wear your Gear S2, Gear S1, or Gear S4 on the go, you’ll need to take a special look at your phone’s back cover.
This Samsung Gear Cover is the one that came with your GearS3.
You can use it to add accessories, but it doesn’t have a built-in SD card slot.
But there’s a way to make it do.
The Samsung Gearcover can be used to attach a phone to your Gears3 with the included cable, but you’ll have to use it in conjunction with a Samsung phone case.
This article explains how.
The first step is to locate your Gear cover on your phone.
Head to Settings > Accessories > Back Cover > Samsung Gear cover and tap the icon that looks like a green circle.
The Gear Cover will appear as a part of the accessory options in the Accessories menu.
When you pick up your Gear Cover, you can choose to use the Samsung Gear case or use a USB cable to connect it to your phone, but not both at the same time.
In the case of the USB cable, you have to select a separate cable from the Samsung cable and then press the button to connect the Gear Cover.
Once connected, you should be able to use your phone as usual.
The other option is to use a Samsung case with the Gearcover, but this takes a little more work.
The process for this is a little bit different from the Gear cover process.
Instead of holding your phone in one hand and holding your Gearcover in the other, you hold the GearCover on a flat surface, like a desk or the top of a table.
Then you need your phone to be touching the GearCase or GearCover while the Gearcase or Gearcover is attached.
Once your phone is attached, it should open up like normal and your phone should work normally.
For this article, we’ll use a Gear case, which is the most common way to attach the GearS2 to your Samsung phone.
Here’s how to attach your Gearcase to your Galaxy Note 3, Galaxy S4, or Galaxy S5: Turn on your Galaxy S3 by going to Settings, then About phone > Check for updates.
Tap the Gear Case icon to access the Gear case menu.
Choose “Attach Gear Case” to connect your GearCase to your device.
Make sure that the Gear Cap is connected and that the case is plugged into your phone charger.
When your phone boots up, you’re going to see a Gear Cover icon on your Gear screen.
This icon shows you the number of connected accessories, including your Gear case and Gearcover.
Next, tap the GearCap icon and select “Attach to Gear Screen” to attach Gear Case to your screen.
Once attached, you will see a blue Gear Screen icon next to the GearCases icon.
You should see a black Gear Cover on the GearScreen, with the number displayed in red.
Tap it to turn on the attached Gear Cover and turn on your device as normal.
If you want, you could also use a third party Gear Cover for this.
This process is a bit different, as we’ll be using a Gear Case, which also requires a Samsung cable.
To attach your Samsung Case to the Galaxy Note3, Galaxy Note, or Samsung Galaxy S1: Open Settings > Mobile > Accessories > Gear case.
You’ll see the Gearcap icon next a GearCase icon.
Tap that to access Gearcase options.
You want to select the Gear Cased option to attach it to GearScreen.
Select your GearCased case and then select “attach Gear Cover” to open up Gearcase Options.
You will be shown three options.
If the Gear Covers are connected, select “Add Gear Cover to Gear Cover Screen.”
If the case isn’t connected, tap “Add Case to Gear Case Screen.”
Once the GearCovers are attached to GearCase, you need a GearCover to attach to GearCase.
Tap “Attach Case to Case Screen” and then tap “Attach Covers” to turn it on.
The attached GearCover should now be on your screen, and you can now access the phone as normal again.
To connect your Samsung Phone to your new Gear Cover: Open Gear Screen and tap Gearcover icon.
From the Gear Screen, tap Gear Cover button to access Options.
From GearCats menu, tap Case.
You’re going have to tap the gear cover to activate the Gearcases.
When the Gearcases GearCap and GearCover are connected to GearCap, your Gearcased GearCover will turn on and will now be attached to your case.
Tap on it to activate GearCoverage and your GearCoax will now turn on, and the Gearcovers GearCap will turn off.
The gearcovers will then revert back to their original state.
This method will work for any GearS1 that you have with you on your Samsung device